What can you develop?

For robot OEMs and hardware R&D teams

Custom robot joints

Building custom articulated arms
Prototyping limb joints and multi-joint mechanisms
Comparing actuator sizes for a new robot design

Compare for this application

For compact mechanical design teams

Space-constrained joints

Thin-profile joint assemblies
Axially constrained robot mechanisms
Packaging a drive into a shallow structure

Compare for this application

Before you choose

Application guidance is based on the listed hardware and development resources. Confirm the software, sensors and integration your project needs.

Custom robot joints: what to confirm

Calculate load, inertia, thermal conditions and duty cycle. Confirm bearings, mounting flanges and mechanical differences between paired models before treating them as interchangeable.

Space-constrained joints: what to confirm

Allow for their planar dimensions of 115 × 61.9 mm and 140.5 × 71.5 mm respectively. Compare the entire mounting envelope, cable clearance and load requirements.

TECHNICAL DATA

Specifications

Mechanical

Parameter	Value
Length and width	115 × 61.9 mm
Height	37 mm
Weight	558 g

Module Performance

Parameter	Value
Reduction ratio	35:1
Rated voltage	24 V
Rated current	3 A
Rated torque	10 N·m
Stall torque	36 N·m
Rated speed	50 rpm
No-load speed	60 rpm
Rated output power	52 W

Motor

Parameter	Value
Torque constant	0.531 N·m/A
Pole pairs	14

Electrical And Control

Parameter	Value
Voltage range	12 to 50.4 V
Peak current	15 A
Speed control accuracy	±10%
Torque control accuracy	±10%
Communication	CAN FD / CAN
Response time	140 µs
Input encoder resolution	14 bit
Output encoder resolution	14 bit
Bus bit rate	5 Mbps
Control frequency	3 kHz